Stock ROM For Lenovo A850

Download and install stock ROM for Lenovo A850 so you will bring back your device to its original condition, and fix any possible technical errors your device might experience now. Of course if your warranty is still on, this firmware will restore it and once again you are covered with warranty for any fix charges your device may need it.

What you need.
  • Lenovo USB Drivers.
  • A computer with a USB cable.
  • Backup before proceeding.
  • Enable your device USB Debugging mode.
  • Charge your device battery power if you think it's not enough to perform the instructions.

Lenovo A850 Stock ROM Firmware


File Name: Lenovo A850 Stock Android
Android ROM Version: 4.2 Firmware
Total Size: 839 MB


How to install stock ROM on Lenovo A850


Follow the tutorials without skipping any steps guys!
Instructions
Follow each step without skipping any of them.
  1. On your computer, open the folder of SP Flash Tool you unzipped earlier. Then right click on the Flash Tool then select the Run As Administrator to launch SP Flash Tool.
    Flash Tool Run As Administrator
  2. SP Flash Tool is now opened, choose the Download tab, and then select Scatter Loading button to find the Scatter File (.txt extension) from your PC (Scatter file is the firmware that's needed to be flashed on your Android based device).
    SP Flash Tool Download Scatter Loading Button
  3. Once you found the Android_Scatter file click on it.
    Choose Android Scatter SP Flash Tool Tutorial
  4. SP Flash Tool will now load the Android scatter file.
  5. You need to click Download button now and see the image.
    Download Android Scatter File MTK
  6. Now turn off your device using the Power Off  option (Remember. If your device battery can be removed, then remove it, if not then just turn your device off and continue to the next step).
    Power Off Samsung Galaxy Device
  7. You need to connect your device to computer now using your USB cable.
    Connect Android Device To PC
  8. On this phase, press  Volume UP or Volume Down to fasten the connection process between your device and computer to flash the firmware.
  9. If it's successful, then firmware flashing will start, a progress bar in yellow color will show indicating the flashing progress. So wait now. Do nothing guys!
    Yellow Progress Bar Smart Phone Flash Tool
  10. When the process is done, SP Flash Tool interface will show you the sign like in the picture.
    Success Flashing SP Flash Tool
  11. You need to disconnect your Android device from computer and then reboot your device.
Notes. To clean up any possible flashing errors it's advised to do factory reset from recovery.

Your device model is not here? Then find it on the dedicated Lenovo stock ROM page!


 Well done my friends! You have successfully installed the .pac file on your device. If you have any questions then reveal them on the provided comment area.

Stock ROM For Lenovo A798T

Download and install stock ROM for Lenovo A798T so you will bring back your device to its original condition, and fix any possible technical errors your device might experience now. Of course if your warranty is still on, this firmware will restore it and once again you are covered with warranty for any fix charges your device may need it.

What you need.
  • Lenovo USB Drivers.
  • A computer with a USB cable.
  • Backup before proceeding.
  • Enable your device USB Debugging mode.
  • Charge your device battery power if you think it's not enough to perform the instructions.


Lenovo A798T Stock ROM Firmware


File Name: Lenovo A798T Stock Android ROM
Android Version: 4.0.4 Firmware
Total Size: 353 MB
Flashing instructions


How to install stock ROM on Lenovo A798T


Follow the tutorials without skipping any steps guys!
Instructions
Follow each step without skipping any of them.
  1. On your computer, open the folder of SP Flash Tool you unzipped earlier. Then right click on the Flash Tool then select the Run As Administrator to launch SP Flash Tool.
    Flash Tool Run As Administrator
  2. SP Flash Tool is now opened, choose the Download tab, and then select Scatter Loading button to find the Scatter File (.txt extension) from your PC (Scatter file is the firmware that's needed to be flashed on your Android based device).
    SP Flash Tool Download Scatter Loading Button
  3. Once you found the Android_Scatter file click on it.
    Choose Android Scatter SP Flash Tool Tutorial
  4. SP Flash Tool will now load the Android scatter file.
  5. You need to click Download button now and see the image.
    Download Android Scatter File MTK
  6. Now turn off your device using the Power Off  option (Remember. If your device battery can be removed, then remove it, if not then just turn your device off and continue to the next step).
    Power Off Samsung Galaxy Device
  7. You need to connect your device to computer now using your USB cable.
    Connect Android Device To PC
  8. On this phase, press  Volume UP or Volume Down to fasten the connection process between your device and computer to flash the firmware.
  9. If it's successful, then firmware flashing will start, a progress bar in yellow color will show indicating the flashing progress. So wait now. Do nothing guys!
    Yellow Progress Bar Smart Phone Flash Tool
  10. When the process is done, SP Flash Tool interface will show you the sign like in the picture.
    Success Flashing SP Flash Tool
  11. You need to disconnect your Android device from computer and then reboot your device.
Notes. To clean up any possible flashing errors it's advised to do factory reset from recovery.

Your device model is not here? Then find it on the dedicated Lenovo stock ROM page!


 Well done my friends! You have successfully installed the .pac file on your device. If you have any questions then reveal them on the provided comment area.

Stock ROM For Lenovo A680

Download and install stock ROM for Lenovo A680 so you will bring back your device to its original condition, and fix any possible technical errors your device might experience now. Of course if your warranty is still on, this firmware will restore it and once again you are covered with warranty for any fix charges your device may need it.

What you need.
  • Lenovo USB Drivers.
  • A computer with a USB cable.
  • Backup before proceeding.
  • Enable your device USB Debugging mode.
  • Charge your device battery power if you think it's not enough to perform the instructions.

Lenovo A680 Stock ROM Firmware


File Name: Lenovo A680 Stock Android ROM
Android Version: 4.2.2 Firmware
Total Size: 1.09 GB


How to install stock ROM on Lenovo A680


Follow the tutorials without skipping any steps guys!
Instructions
Follow each step without skipping any of them.
  1. On your computer, open the folder of SP Flash Tool you unzipped earlier. Then right click on the Flash Tool then select the Run As Administrator to launch SP Flash Tool.
    Flash Tool Run As Administrator
  2. SP Flash Tool is now opened, choose the Download tab, and then select Scatter Loading button to find the Scatter File (.txt extension) from your PC (Scatter file is the firmware that's needed to be flashed on your Android based device).
    SP Flash Tool Download Scatter Loading Button
  3. Once you found the Android_Scatter file click on it.
    Choose Android Scatter SP Flash Tool Tutorial
  4. SP Flash Tool will now load the Android scatter file.
  5. You need to click Download button now and see the image.
    Download Android Scatter File MTK
  6. Now turn off your device using the Power Off  option (Remember. If your device battery can be removed, then remove it, if not then just turn your device off and continue to the next step).
    Power Off Samsung Galaxy Device
  7. You need to connect your device to computer now using your USB cable.
    Connect Android Device To PC
  8. On this phase, press  Volume UP or Volume Down to fasten the connection process between your device and computer to flash the firmware.
  9. If it's successful, then firmware flashing will start, a progress bar in yellow color will show indicating the flashing progress. So wait now. Do nothing guys!
    Yellow Progress Bar Smart Phone Flash Tool
  10. When the process is done, SP Flash Tool interface will show you the sign like in the picture.
    Success Flashing SP Flash Tool
  11. You need to disconnect your Android device from computer and then reboot your device.
Notes. To clean up any possible flashing errors it's advised to do factory reset from recovery.

Your device model is not here? Then find it on the dedicated Lenovo stock ROM page!


 Well done my friends! You have successfully installed the .pac file on your device. If you have any questions then reveal them on the provided comment area.

Stock ROM For Lenovo A630

Download and install stock ROM for Lenovo A630 so you will bring back your device to its original condition, and fix any possible technical errors your device might experience now. Of course if your warranty is still on, this firmware will restore it and once again you are covered with warranty for any fix charges your device may need it.

What you need.
  • Lenovo USB Drivers.
  • A computer with a USB cable.
  • Backup before proceeding.
  • Enable your device USB Debugging mode.
  • Charge your device battery power if you think it's not enough to perform the instructions.

Lenovo A630 Stock ROM Firmware


File Name: Lenovo A630 Stock Android ROM
Android Version: 4.0.4 Firmware
Total Size: 753 MB


How to install stock ROM on Lenovo A630


Follow the tutorials without skipping any steps guys!
Instructions
Follow each step without skipping any of them.
  1. On your computer, open the folder of SP Flash Tool you unzipped earlier. Then right click on the Flash Tool then select the Run As Administrator to launch SP Flash Tool.
    Flash Tool Run As Administrator
  2. SP Flash Tool is now opened, choose the Download tab, and then select Scatter Loading button to find the Scatter File (.txt extension) from your PC (Scatter file is the firmware that's needed to be flashed on your Android based device).
    SP Flash Tool Download Scatter Loading Button
  3. Once you found the Android_Scatter file click on it.
    Choose Android Scatter SP Flash Tool Tutorial
  4. SP Flash Tool will now load the Android scatter file.
  5. You need to click Download button now and see the image.
    Download Android Scatter File MTK
  6. Now turn off your device using the Power Off  option (Remember. If your device battery can be removed, then remove it, if not then just turn your device off and continue to the next step).
    Power Off Samsung Galaxy Device
  7. You need to connect your device to computer now using your USB cable.
    Connect Android Device To PC
  8. On this phase, press  Volume UP or Volume Down to fasten the connection process between your device and computer to flash the firmware.
  9. If it's successful, then firmware flashing will start, a progress bar in yellow color will show indicating the flashing progress. So wait now. Do nothing guys!
    Yellow Progress Bar Smart Phone Flash Tool
  10. When the process is done, SP Flash Tool interface will show you the sign like in the picture.
    Success Flashing SP Flash Tool
  11. You need to disconnect your Android device from computer and then reboot your device.
Notes. To clean up any possible flashing errors it's advised to do factory reset from recovery.

Your device model is not here? Then find it on the dedicated Lenovo stock ROM page!


 Well done my friends! You have successfully installed the .pac file on your device. If you have any questions then reveal them on the provided comment area.

Stock ROM For Lenovo A630T

Download and install stock ROM for Lenovo A630T so you will bring back your device to its original condition, and fix any possible technical errors your device might experience now. Of course if your warranty is still on, this firmware will restore it and once again you are covered with warranty for any fix charges your device may need it.

What you need.
  • Lenovo USB Drivers.
  • A computer with a USB cable.
  • Backup before proceeding.
  • Enable your device USB Debugging mode.
  • Charge your device battery power if you think it's not enough to perform the instructions.

Lenovo A630T Stock ROM Firmware

File Name: Lenovo A630T Stock Android
Android ROM Version: 4.0.4 Firmware
Total Size: 378 MB

How to install stock ROM on Lenovo A630T


Follow the tutorials without skipping any steps guys!
Instructions
Follow each step without skipping any of them.
  1. On your computer, open the folder of SP Flash Tool you unzipped earlier. Then right click on the Flash Tool then select the Run As Administrator to launch SP Flash Tool.
    Flash Tool Run As Administrator
  2. SP Flash Tool is now opened, choose the Download tab, and then select Scatter Loading button to find the Scatter File (.txt extension) from your PC (Scatter file is the firmware that's needed to be flashed on your Android based device).
    SP Flash Tool Download Scatter Loading Button
  3. Once you found the Android_Scatter file click on it.
    Choose Android Scatter SP Flash Tool Tutorial
  4. SP Flash Tool will now load the Android scatter file.
  5. You need to click Download button now and see the image.
    Download Android Scatter File MTK
  6. Now turn off your device using the Power Off  option (Remember. If your device battery can be removed, then remove it, if not then just turn your device off and continue to the next step).
    Power Off Samsung Galaxy Device
  7. You need to connect your device to computer now using your USB cable.
    Connect Android Device To PC
  8. On this phase, press  Volume UP or Volume Down to fasten the connection process between your device and computer to flash the firmware.
  9. If it's successful, then firmware flashing will start, a progress bar in yellow color will show indicating the flashing progress. So wait now. Do nothing guys!
    Yellow Progress Bar Smart Phone Flash Tool
  10. When the process is done, SP Flash Tool interface will show you the sign like in the picture.
    Success Flashing SP Flash Tool
  11. You need to disconnect your Android device from computer and then reboot your device.
Notes. To clean up any possible flashing errors it's advised to do factory reset from recovery.

Your device model is not here? Then find it on the dedicated Lenovo stock ROM page!


 Well done my friends! You have successfully installed the .pac file on your device. If you have any questions then reveal them on the provided comment area.

Stock ROM For Lenovo A590

Download and install stock ROM for Lenovo A590 so you will bring back your device to its original condition, and fix any possible technical errors your device might experience now. Of course if your warranty is still on, this firmware will restore it and once again you are covered with warranty for any fix charges your device may need it.

What you need.
  • Lenovo USB Drivers.
  • A computer with a USB cable.
  • Backup before proceeding.
  • Enable your device USB Debugging mode.
  • Charge your device battery power if you think it's not enough to perform the instructions.

Lenovo A590 Stock ROM Firmware


File Name: Lenovo A590 Stock Android ROM
Android Version: 4.1.1 Firmware
Total Size: 737 MB

How to install stock ROM on Lenovo A590


Follow the tutorials without skipping any steps guys!
Instructions
Follow each step without skipping any of them.
  1. On your computer, open the folder of SP Flash Tool you unzipped earlier. Then right click on the Flash Tool then select the Run As Administrator to launch SP Flash Tool.
    Flash Tool Run As Administrator
  2. SP Flash Tool is now opened, choose the Download tab, and then select Scatter Loading button to find the Scatter File (.txt extension) from your PC (Scatter file is the firmware that's needed to be flashed on your Android based device).
    SP Flash Tool Download Scatter Loading Button
  3. Once you found the Android_Scatter file click on it.
    Choose Android Scatter SP Flash Tool Tutorial
  4. SP Flash Tool will now load the Android scatter file.
  5. You need to click Download button now and see the image.
    Download Android Scatter File MTK
  6. Now turn off your device using the Power Off  option (Remember. If your device battery can be removed, then remove it, if not then just turn your device off and continue to the next step).
    Power Off Samsung Galaxy Device
  7. You need to connect your device to computer now using your USB cable.
    Connect Android Device To PC
  8. On this phase, press  Volume UP or Volume Down to fasten the connection process between your device and computer to flash the firmware.
  9. If it's successful, then firmware flashing will start, a progress bar in yellow color will show indicating the flashing progress. So wait now. Do nothing guys!
    Yellow Progress Bar Smart Phone Flash Tool
  10. When the process is done, SP Flash Tool interface will show you the sign like in the picture.
    Success Flashing SP Flash Tool
  11. You need to disconnect your Android device from computer and then reboot your device.
Notes. To clean up any possible flashing errors it's advised to do factory reset from recovery.

Your device model is not here? Then find it on the dedicated Lenovo stock ROM page!


 Well done my friends! You have successfully installed the .pac file on your device. If you have any questions then reveal them on the provided comment area.

Stock ROM For Lenovo A606

Download and install stock ROM for Lenovo A606 so you will bring back your device to its original condition, and fix any possible technical errors your device might experience now. Of course if your warranty is still on, this firmware will restore it and once again you are covered with warranty for any fix charges your device may need it.

What you need.
  • Lenovo USB Drivers.
  • A computer with a USB cable.
  • Backup before proceeding.
  • Enable your device USB Debugging mode.
  • Charge your device battery power if you think it's not enough to perform the instructions.

Lenovo A606 Stock ROM Firmware


  • File Name: Lenovo A606 Stock Android ROM
  • Android Version: 2.3.5 Firmware
  • Total Size: 1.3 GB + 1.3 GB + 1.3 GB

How to install stock ROM on Lenovo A606


Follow the tutorials without skipping any steps guys!
Instructions
Follow each step without skipping any of them.
  1. On your computer, open the folder of SP Flash Tool you unzipped earlier. Then right click on the Flash Tool then select the Run As Administrator to launch SP Flash Tool.
    Flash Tool Run As Administrator
  2. SP Flash Tool is now opened, choose the Download tab, and then select Scatter Loading button to find the Scatter File (.txt extension) from your PC (Scatter file is the firmware that's needed to be flashed on your Android based device).
    SP Flash Tool Download Scatter Loading Button
  3. Once you found the Android_Scatter file click on it.
    Choose Android Scatter SP Flash Tool Tutorial
  4. SP Flash Tool will now load the Android scatter file.
  5. You need to click Download button now and see the image.
    Download Android Scatter File MTK
  6. Now turn off your device using the Power Off  option (Remember. If your device battery can be removed, then remove it, if not then just turn your device off and continue to the next step).
    Power Off Samsung Galaxy Device
  7. You need to connect your device to computer now using your USB cable.
    Connect Android Device To PC
  8. On this phase, press  Volume UP or Volume Down to fasten the connection process between your device and computer to flash the firmware.
  9. If it's successful, then firmware flashing will start, a progress bar in yellow color will show indicating the flashing progress. So wait now. Do nothing guys!
    Yellow Progress Bar Smart Phone Flash Tool
  10. When the process is done, SP Flash Tool interface will show you the sign like in the picture.
    Success Flashing SP Flash Tool
  11. You need to disconnect your Android device from computer and then reboot your device.
Notes. To clean up any possible flashing errors it's advised to do factory reset from recovery.

Your device model is not here? Then find it on the dedicated Lenovo stock ROM page!


 Well done my friends! You have successfully installed the .pac file on your device. If you have any questions then reveal them on the provided comment area.